Sensor Conveyor Belt for Conveyor

• Type: Every
• Material: Every
• Inside Material: Every
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: RPR019
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Transport Package: General
• Specification: 1000*1500
• Trademark: Respower
• Origin: China
• HS Code: 40101200
• Production Capacity: 5000000 Meters/Year
• Package Size: 1000.00cm * 1000.00cm * 180.00cm
• Package Gross Weight: 10.000kg
• Lead Time: 7 days (1 - 1000 Meters) ; To be negotiated ( > 1000 Meters)

Product Description

Feature
The most popular passive belt protection system is induction loops/coils in combination with external transmitters and receivers.
If a foreign body penetrates the belt and gets stuck in the conveyor structure, it may rip the belt..
If a sensor loop is cut by this foreign body, no signal is transferred by the loop anymore - the receiver sensor does not get a signal and shuts off the conveyor drive.
Some time, when belt deviation or congestion occurs, and over rating value, the sensor will alarm and lunch emergency braking system, easy to find accident in time, to reduce the loss.
 

Technical proposal in loops installing

1. in order to protect loop, rubber cover thickness should be over 6.0mm.
2. the loop can be vulcanized into steel cord or multi-ply conveyor belt, belt's top or bottom cover. 3 the loop distance between 50meters to 150meters is better.

1. two types loops exist for difference purpose, normal or flame resistance rubber cover belt application, normal type use the ordinary cement, the flame resistant type use the flame resistant cement..
2. Before choosing sensor conveyor belt, please let us know the specification, and then we can provide you the most appropriate advice.

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply N/mm	Cover to Ply N/mm	Ply to Ply
DIN 22102	Mpa	%	mm3	(≤1.5mm)	(>1.5mm)	N/mm
DIN 22102-Z	15	350	250	3.5	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN 22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply N/mm	Cover to Ply N/mm	Ply to Ply
AS 1332	Mpa	%	mm3	(≤1.9mm)	(>1.9mm)	N/mm
AS 1332-N	17	400	200	4	4.8	6
AS 1332-M	24	450	125	4	4.8	6
AS 1332-E	14	300	250	4	4.8	6
AS 1332-A	17	400	70	4	4.8	6

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply N/mm	Cover to Ply N/mm	Ply to Ply
SANS 1173	Mpa	%	mm3	N/mm		N/mm
A	18	400	70	5		7
C	20	400	150	5		7
M	25	450	120	5		7
N	17	400	150	5		7

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply N/mm	Cover to Ply N/mm	Ply to Ply
RMA	Mpa	%	mm3	(≤1.6mm)	(>1.6mm)	N/mm
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4